Home » DIY TIPS

Category Archives: DIY TIPS

What is Cricut Design Space? How Does It Work?


This article and photos may possibly comprise Amazon or other affiliate one-way links. If you purchase anything by any backlink, I may well get a smaller fee at no excess cost to you. Any materials utilised may well be provided to me free of charge, having said that, all tasks and opinions are my possess.

You may perhaps be pondering what is Cricut Layout Space? How does it get the job done? Do you have to use it? Does it value anything at all? I assumed I would solution all of those people concerns and a lot more for you currently. Let us dive into Cricut Design and style House and acquire a seem at how it communicates with your Cricut. Irrespective of whether you are a Cricut novice or just asking yourself about the software program, you will locate the information and facts you want underneath.

This post is sponsored by Cricut, even so, all assignments and thoughts are my personal.

On the lookout to find out your Cricut device? You can indicator up for my 7 working day absolutely free Cricut course in this article.

what is cricut design space

What is Cricut Style House?

Cricut Design and style House is the software program that you use to converse with your Cricut machine. It is what you use to design, add, or pick out the design that you will make with your Cricut. You can in fact observe the video clip down below to see all of the details about Cricut Design Place. Just simply click enjoy to observe.

Just cannot view the video clip or skipped some of the information and facts? Still baffled about the problem what is Cricut Style Area? You can read additional underneath!

What equipment use Cricut Style and design Place?

Use Cricut Structure Space to talk from your unit to any machine. Cricut Style and design House operates with the Pleasure, Take a look at collection, and Maker collection. I will note that older equipment are no lengthier supported so they do not operate with the system.

Platforms for Cricut Design and style Area

What can you use Cricut Layout Area on? It functions on Personal computer, Mac, iOS equipment, as perfectly as Android. I will observe that using a pc presents you the most options as the mobile purposes are not compatible with all the things your equipment may be capable to do.

cricut design space home page what is cricut design space

Are there any expenses to use Design Place for Cricut crafting?

No! You can obtain and use Cricut Style Room for free. You can make items with your have fonts and illustrations or photos for free of charge applying the computer software. There is no fee for carrying out any of individuals. If you want to use the Cricut photographs, fonts, or assignments, you can pay out by the venture or get a Cricut Accessibility membership.

What is Cricut Accessibility? What are the benefits?

Cricut Accessibility is a month-to-month membership that presents you accessibility to several photos, fonts, and assignments ideal in Cricut Style and design Area. That will make it simple to select a little something, click on make it, and get inventive even quicker. You also get savings on components from Cricut. Devices occur with a absolutely free trial and that is a wonderful time to see if this subscription is appropriate for you or if you never have to have it at all.

Using Design Area Ahead of You Have a Equipment

A person of my top recommendations is that you can use Cricut Layout Place prior to you even obtain a machine. It is a great want to start off receiving common with the interface. I also like to advocate that individuals obtain it if they are nervous about a Cricut currently being complex to use. It is a good way to “test drive” a Cricut without the need of paying any income.

Other Applications to Try

Cricut Design and style House is the only application that will talk with your Cricut. Having said that, there is 1 exception to that rule. If you have the Cricut Pleasure, you can give the Cricut Joy app a attempt. This app is not as robust as Style Room but it is excellent to make issues like brief labels or cards.

What does Style Room do?

Design and style Area is the interface you need to have to send your styles from your computer or cell system to your equipment. It converts the design into some thing that the machine can interpret. You can use it to upload your individual designs or even produce them correct on the platform. As I mentioned higher than, you can decide on from tasks and images that are pre-loaded as very well.

images in design space

At the time you have your design, you click on “make it” to start the minimize. Then there are a broad range of supplies to pick from that your machine can slice. Structure Place will also inform you what blade to use as perfectly as give you recommendations and tricks about your cut. For illustration, it will convey to you to mirror your layout if you are employing an iron-on product.

cutting in cricut design space

Cricut Structure Place will also communicate with your printer for print then slice. You use the computer software to send out a print to your printer then the Cricut equipment can go through it and slash all around the print traces. Print then lower is a genuinely interesting attribute if you have not utilised it nonetheless. Take note: Print then reduce is not compatible with Cricut Pleasure.

print then cut in cricut design space

Registering Your Equipment with Design Place

Registering your equipment is one thing that you can do proper in Style and design Area. This is true for the EasyPress and Mug Press as nicely. So, you might need to have Design and style Space for this even if you don’t have a equipment.

cricut machine setup

How to Use Cricut Design and style Space

We have answered the problem of what is Cricut Style and design Area, having said that, now it is time to master how to use it. I have really a number of means for you to do just that. Begin with the links under to get commenced!

Now that you know what is Cricut Layout Space, your following phase is to begin making use of it and your Cricut device. Crack that Cricut out of the box and start producing. There is no far better time to get started out than now!

what is design space for a cricut machine

[ad_2]

Supply link

Free Coffee SVG: 12 Free Files for Your Crafts


This write-up and images may well comprise Amazon or other affiliate back links. If you purchase anything by any connection, I could get a little fee at no additional cost to you. Any supplies utilised could be presented to me cost-free of cost, nevertheless, all initiatives and opinions are my own.

What is superior than a no cost espresso SVG? Nicely, how about 15 free of charge data files? Yep, I have a file for you then various of my web site buddies are joining me now and giving you some SVG files for your Cricut crafts as perfectly. Just scroll down to the bottom of this put up to see all of the documents and obtain some thing best for Oktoberfest or any time of the calendar year. If you love totally free SVG data files, this is undoubtedly the website post for you!

coffee svg

Absolutely free Coffee SVG

To get your no cost file, just sign up for the newsletter in the box down below and the file will be despatched to your electronic mail. Appear for a box down below with a photo of the file you are wanting for then include in your data. If you now get the e-newsletter, just insert in your info once again as you will not be signed up for anything at all even more. Once you signal up, examine your e mail to get your file. If you are owning any problems, please test the FAQ website page initially.

Be sure to observe that this file is for particular use only. You can get in touch with me for business use or if you have any issues having your files.

How to Use This Espresso Slice File

The moment you get your free of charge coffee SVG, you will want to commence developing ideal away. My most loved way to use this file is on a shirt and you can see primary recommendations for how to do that listed here. You can also put it on a large wide range of surfaces. Listed here are just a couple of concepts:

coffee cut file

So, indication up in the box over to get your file then get started making. You will be so glad that you did! Just after all, there isn’t just about anything greater than a large cup of espresso or even tea! This free of charge SVG file would perform for them both.

free coffee svg file

I will be wondering up new means to use this cost-free espresso SVG additionally all of the other files underneath. I know you will come across many crafts to make with this adorable file for on your own or even to give as presents.

free coffee cut file

Want much more espresso SVG documents?

I promised you even extra lovable files for your crafting and I surely have them for you this month. Find the file you want and simply click the connection underneath. You will require to follow the recommendations on each web site to get your minimize information. Joyful crafting!

coffee svgs

So, grab a absolutely free espresso SVG or 3 or 15! You are likely to love what you produce with these sweet and free SVG data files.

[ad_2]

Source link

How to Use Glyphs in Cricut Design Space


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Today we’re going to talk about how to use glyphs in Cricut Design Space. You may also hear these referred to as special characters, alternate characters, flourishes, swishes, or even swooshes. It’s those pretty things that you see at the beginning and at the end of words or joining words in the middle. These are characters that are not part of the font itself. You can access all of those flourishes, swooshes, and font extras right on your computer. Whether you use a PC or a Mac, you can add them right into Cricut Design Space. 

how to use glyphs in cricut design space

How to Use Glyphs in Cricut Design Space

I am sharing all about glyphs in the video below. Click play and watch me add them to Design Space and make a design.

Can’t watch the video or missed some of the information? You can also follow along below.

Does this work on mobile?

As far as I know, you do need a PC or a Mac computer to access glyphs. I don’t know of an app, as of this post, that would work on your mobile device. For now, I’m going to jump into my PC first, and I’m going to show you how to use the Character Map to access those special characters. We’ll talk a little bit about Mac at the end as well. I will follow up with mobile information if I find out any solutions.

Using Character Map on a PC

Let’s talk about how to turn the top text in the image below into the bottom text using glyphs and the Character Map. The font we’re using is called “Speak Love,” however, many fonts include extra characters that you can use instead of just the normal characters. Pick the font and type out the names first.

glyphs in design space

Go down to the bottom of your screen and type “character” then open the Character Map.

opening character map

Then find your font in the drop-down menu and pick it. Again, we’re using “Speak Love.”

searching for your font on the character map

You will have to scroll quite a bit on the Character Map to find the correct characters. Keep scrolling until you find the characters that you’re looking for. These are extra characters for the font itself.

finding glyphs in the character map

Here I found the T I needed for the beginning of Tom. Double-click it and it goes down to the bottom portion. From there, you can highlight it and click copy.

copying font characters

In Cricut Design Space, double-click like you are altering the text. Erase the T that is already there. Paste what we copied from the Character Map. I like to use my keyboard shortcuts, and hold down “Control” and press “V”. It will look like a square because it’s not part of my font, but as you can see, it copy and pasted it correctly. Now I have that T from my Character Map in my font itself.

adding glyphs to cricut design space on a pc

Repeat this same process for the rest of the characters. I did have to delete the spaces to get the middle heart to connect. You may need to pick everything and click weld these in order for them to cut as one piece. NOTE: Once you click, “weld,” the text is not editable. Be sure that your text is just the way you want it before you click it.

cricut design space font characters

Click make it and continue to cut your projects.

adding characters to fonts in design space

Using Font Book on Mac

Mac users, I did promise you an alternative. While I don’t have a Mac, you can use Font Book on a Mac, similarly to the way I just used Character Map. Again, it comes with your MacBook. You would just search for “Font Book,” use it similarly, find your swoosh or flourish. Copy it and paste it into Design Space. It should work in a similar manner and help you find all those glyphs on your font. 

fontbook on a mac

I hope this helps you open up your font options with special characters, flourishes, swooshes, glyphs, whatever you want to call them! I hope it opens up your character options, right in Cricut Design Space, so you can start making amazing things. Now that you know how to use glyphs in Cricut Design Space, what will you make?

special characters in cricut design space

Love this and looking for more Cricut ideas? Try the links below as well!

easy banner made from paper on a table
Making a Cricut Banner

This easy DIY project is perfect for those just getting started with their Cricut and can be used for any occasion!

Read More

cricut silk screen
Cricut Silk Screen

Learn to use vinyl and your Cricut to screen print on a variety of materials.

Read More

cricut cutting wood words
Wood Veneer Cricut Explore

Cut these real wood words with your Cricut Explore machine.

Read More

activities mason jar
How to Use Cricut Printable Vinyl

Make stickers and more from printable vinyl on your Cricut machine.

Read More

learning how to make felt flowers
Cricut Felt Flowers

Learn how to make felt flowers with your Cricut machine in just minutes.

Read More

[ad_2]

Source link

Glow In The Dark Sublimation Shirt Perfect for Halloween


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

A glow in the dark sublimation shirt is perfect for the upcoming Halloween season. Glow in the dark HTV is easy to use and you can even sublimate on top of it! Yes, this shirt glows in the dark and is super cute as well. It is perfect for Halloween night or any party that you are attending. This is an amazing project for all sublimation crafters and a great way to sublimate on dark colors.

glow in the dark halloween shirt

Glow in the Dark Sublimation

The process for making your own glow in the dark shirts is really easy. Grab your sublimation printer and start creating these shirts this season. You can actually watch the full tutorial in the video below. Just click play!

Can’t watch the video or missed some of the steps? You can also follow along with the directions below.

Supplies Needed:

supplies to do glow in the dark sublimation on a shirt

What kind of shirt do I need?

You can use any shirt you’d like because you are adding your sublimation on top of the HTV. You can have any color you want, and it can be 100% cotton. The main thing is that it needs to work with the HTV product that you purchase so be sure to read those instructions.

What kind of images work best with this?

You want your image to glow in the dark, so ones that have areas without design work best. That way, there’s no color sublimating on top of the HTV in a few areas at least. In our design, the pink area will glow, but not as much as the clear areas. For the best glow-in-the-dark sublimation, try to find images with lots of clear space. You can pick any design you like, but the maximum print then cut on Cricut Design Space is 6.75 x 9.25 inches. I will be using Design Space for printing in this case as you do need to cut your HTV.

How to Sublimate on Glow in the Dark HTV

Now that you have your image and shirt picked, it is time to add some glow-in-the-dark fun to your Halloween wardrobe.

Adding the Design to Cricut Design Space

Upload your image and add it to your canvas. Then make a circle the same size. You can use this circle to slice your image if it has some extra area around the outside that you do not want to print. Then I like to make the circle slightly larger than the image to cover up any alignment mistakes when sublimating. Then click make it!

sublimation design in cricut design space

Printing and Cutting

Next, you will print your sublimation image using sublimation ink, printer, and sublimation paper (don’t forget to mirror your project!) Then cut the HTV using your Cricut machine. Weed away any excess HTV so you are left with just what you will press to your shirt.

cutting glow in the dark HTV on a cricut

Pressing the Glow in the Dark Sublimation

Now that all of your pieces are ready, it is time to finish this project! First, add the HTV to your shirt in the right location.

applying glow in the dark HTV to a shirt

Press at 356 degrees F for about 5 seconds. You just want it to stick enough so you can remove the carrier sheet. Peel back your carrier sheet and discard.

removing carrier sheet from glow n the dark iron on

Add the sublimation print on top of the HTV aligning it so that the print fits on top.

adding a sublimation print to glow in the dark htv

Then tape the sublimation print down well using heat-resistant tape.

taping down a sublimation print

Add a sheet of protective paper over the top and press at 356 degrees F for 25 seconds.

covering sublimation print with protective paper

Once you are done pressing, carefully remove the sublimation print from your HTV. It will be hot so use caution.

sublimation on HTV

Now you are ready to watch your design glow on Halloween night! This shirt is done and ready to wear to any party that you may be attending. Please note that the discoloration from my heat press went away after a few minutes. Some shirt colors will look different when heated but will go back to their original color once cooled.

shirt with sublimation on htv

FAQ

Here are a few of the most common questions that I get about this project. Feel free to ask any other questions in the comment section below.

Can you wash this shirt?

This is probably the number one question I get about this project and yes you can! I have worn and washed this shirt several times without issues. The sublimation print reacts with the polyester in the glow in the dark HTV creating a permanent bond.

How long will this shirt last?

It will last as long as the HTV holds up. The sublimation is bonded permanently to the HTV.

Can I use other brands of glow in the dark HTV?

I tried two different brands when experimenting with this and I was only happy with the results from the Siser. So I would say that you can experiment with other brands but they may not work the same as you see here.

Can I sublimation on any HTV product?

I have other experiments that I will be doing soon so stay tuned!

Does it really glow?

I can confidently say this product glows in the dark! It is actually pretty amazing in person. You can see it in action in the video at the beginning of this post as well. Remember that the clear or white areas of your design will glow the most.

glow in the dark halloween witch design

Whether you’re making a shirt, something for the kids’ costumes or something else entirely it is so easy to sublimate right on top of your glow in the dark HTV and it opens your range of materials you can sublimate onto!

glow in the dark sublimation shirt

So, make your own version of this shirt today. I really think you will love the results. I know that I am in love with it!

angie holden wearing a glow in the dark shirt

Give glow in the dark sublimation a try this season. I know you will love the results and how great they look for all of your Halloween crafts!

sublimation glow in the dark

Need more ideas with your Cricut? Try the links below as well!

halloween gift ideas
Coffin Treat Boxes

Make Halloween favor boxes shaped liked coffins for a spooky good time!

Read More

baking soda and acrylic paint on pumpkins
How to Paint Pumpkins

Add texture to the surface of painting pumpkins using this technique of mixing baking soda with Testors craft paint.

Read More

halloween mason jar
Halloween Mason Jar

Make these cute jars with your Cricut machine and some paper! Everyone will love getting these as a gift this fall.

Read More

Need Halloween candy ideas? Try making these witch legs for a creative Halloween treat!
DIY Halloween Treats with Your Cricut Machine

Make these candy witch legs with a few supplies and your Cricut.

Read More

halloween bags with names
DIY Tote Bags for Halloween

Make these cute DIY Halloween bags in minutes with a few supplies and your Cricut machine.

Read More

Want to print the instructions for glow in the dark sublimation? Use the card below!

sublimation shirt that glows in the dark

Glow in the Dark Sublimation Shirt

Make a cute Halloween shirt that really glows using sublimation and your Cricut machine!

Supplies

  • Siser Glow in the Dark HTV
  • Shirt any color or fabric that you like
  • Sublimation Ink
  • Sublimation Paper
  • Epson EcoTank Printer
  • Protective paper
  • Heat resistant tape
  • Heat press
  • Weeding tools
  • Cricut machine
  • Witch Image

Instructions

Adding the Design to Cricut Design Space

  • Upload your image and add it to your canvas. Then make a circle the same size. You can use this circle to slice your image if it has some extra area around the outside that you do not want to print. Then I like to make the circle slightly larger than the image to cover up any alignment mistakes when sublimating. Then click make it!

Printing and Cutting

  • Next, you will print your sublimation image using sublimation ink, printer, and sublimation paper (don’t forget to mirror your project!) Then cut the HTV using your Cricut machine. Weed away any excess HTV so you are left with just what you will press to your shirt.

Pressing the Glow in the Dark Sublimation

  • Now that all of your pieces are ready, it is time to finish this project! First, add the HTV to your shirt in the right location.

  • Press at 356 degrees F for about 5 seconds. You just want it to stick enough so you can remove the carrier sheet. Peel back your carrier sheet and discard.

  • Add the sublimation print on top of the HTV aligning it so that the print fits on top.

  • Then tape the sublimation print down well using heat-resistant tape.

  • Add a sheet of protective paper over the top and press at 356 degrees F for 25 seconds.

  • Once you are done pressing, carefully remove the sublimation print from your HTV. It will be hot so use caution.

Tried this project?tag us to show off your work!



[ad_2]

Source link

Weeding Boxes: Everything You Need to Know


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Do you know what weeding boxes are? I am covering how to use them with your Cricut as well as why you would want to use them. These boxes can be super convenient for weeding as well as locating your design on your blank. Watch me create weeding boxes and use them to make a couple of projects. You might find that you are using boxes for weeding on your crafts as well!

cricut weeding boxes

Weeding Boxes

You can actually watch the full tutorial in the video below. Just click play and watch as I make weeding boxes in Cricut Design Space and use them to create a couple of projects.

Don’t want to watch the video just yet? Follow along below!

What is a weeding box?

A weeding box is something that you put around your design in Cricut Design Space, and it has a few benefits as well as some drawbacks. Let’s take a look at both!

Benefits of weeding boxes

Weeding boxes have many benefits including:

  • helping you with weeding
  • saving material
  • help when applying the vinyl to your surface
  • assist with layering vinyl and locating your design
weeding box on pink vinyl

Drawbacks of weeding boxes

As with anything, there are drawbacks as well. When using weeding boxes for locating and layering your design, you will find that you actually waste more material. Is it worth it? Keep reading and decide for yourself!

Supplies needed:

supplies to make vinyl sign with a cricut

How to Make a Weeding Box in Cricut Design Space

There are a couple of different ways to make a weeding box depending on what you are working on. You can actually watch me make these weeding boxes in the video above if you would like.

For single-color designs:

  1. Start with your design in Cricut Design Space.
  2. On the left hand size of the screen under shapes, you’re going to want to add a square to the canvas.
  3. Unlock the size and drag it to the size of your choice. I am using a 6 inch x 6 inch box for my example.
  4. Click arrange and send the box to the back.
  5. Then pick both the box and your design and click align then pick center so that your design is perfectly even with the square.
  6. While everything is picked, click attach.
  7. You’re ready to cut!

For layering:

One of the great benefits of weeding boxes is using them to help with your layering on multi-colored projects. You can use the weeding boxes to help you align your project so that you can get your design perfectly layered every time!

  1. Start with your prject in Cricut Design Space and add a square.
  2. Adjust the square to your preferred size for your project and send to the back using arrange.
  3. Pick your box and your design then click align and center.
  4. Highlight your design and weeding box and copy it for however many colors you’re going to be cutting.
  5. In each of the boxes, you’re going to want to hide everything except for the color you’re going to cut.
  6. Now that you have each color on a separate block, pick each box along with the color it goes with and click attach. You will also want to make sure that the color of each block and design matches the color of vinyl you will be using at this point.
  7. Now you’re ready to click Make It and cut each of your vinyl layers.
Weeding Boxes: Everything You Need to Know

How to Use a Box for Weeding

Now that you have your project cut, you are ready to start weeding! You can use the box to weed just a small area of a larger sheet. They are also helpful when you have several things on one large sheet so you can concentrate on weeding one area at a time. My favorite use for weeding boxes by far is layering and locating vinyl. Keep reading to see how I do that below!

various vinyl pieces with weeding boxes

Using Weeding Boxes to Locate Vinyl

This method is best for a single layer. I trim the vinyl right where the weeding box is located. Then cut a piece of transfer tape the exact size. In this case, they are both 6 inches by 6 inches which is the same size as my wood blank.

adding vinyl to transfer tape using weeding boxes

Then line up the transfer tape exactly with the edges of the vinyl backing.

transfer tape vinyl application

Burnish well and peel back the backing paper leaving the vinyl on the transfer tape.

putting transfer tape on vinyl

Then use the transfer tape to align exactly to the edges of your blank. This ensures that your vinyl is right in the middle of your project.

using transfer tape to help locate vinyl on a sign

Burnish well and peel back the transfer tape to complete your project.

peeling back transfer tape from sign

Such an easy way to make sure that your vinyl is in the right location every single time!

wood sign with vinyl design

Layering Vinyl Using Weeding Boxes

If the project you’re making has complicated layers, you may want to use weeding boxes to get it perfectly aligned as well. There are a few more steps but it is still a fairly easy process. This time you can trim your vinyl but you want to leave a small piece of the box all the way around every single layer. You will also need a piece of transfer tape larger than the box and your blank.

how to use weeding boxes to locate vinyl

Start with your top layer and add your transfer tape. Burnish down well then peel away the backing paper leaving the box on the transfer tape.

putting pink vinyl onto transfer tape

Then use that box to align your next layer. Put the first layer directly over the second where all sides of the box line up. Once again burnish the vinyl and peel away the backing paper.

adding vinyl layers to transfer tape

Repeat for each layer until they are all on the transfer tape.

various layers of vinyl on transfer tape

Again I made the box the same size as my blank, so I used it to align to the four sides of my wood piece.

weeding box used to locate vinyl on a sign

Burnish well and peel back the transfer tape. You want to leave your vinyl on the surface EXCEPT for the weeding boxes. Those you want to pull up as you go.

peeling back transfer tape from layered vinyl sign

You have a perfectly layered sign in minutes! If you still have issues layering, you might want to try the parchment paper hack here.

layered vinyl sign with a cricut machine

Should you use boxes for weeding?

I hope you found this tutorial helpful and gave you a little more insight on what weeding boxes are, how they can be helpful, and how you can use them in your projects. The only question is should you use them for your crafts? You can see that they can be helpful but they are definitely not for everyone. Give them a try a few times and see if you might like them! You may just find a new way to craft that makes everything a bit easier.

how to use boxes for weeding

I hope this tutorial at least gave you some ideas on ways to do your vinyl crafts a bit differently.

weeding boxes

Give weeding boxes a try for yourself! I really think you will love how they change your crafting!

how to use weeding boxes

[ad_2]

Source link

Decorative Glass Jars: Put Vinyl on Mason Jars with Your Cricut


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Add vinyl on mason jars to make some quick and easy decorative glass jars for fall. This simple technique will have you adding these jars all over your home. Welcome fall with a friendly greeting! Fall jars are my absolute favorite thing to decorate with. Plus, this technique of adding vinyl with your Cricut machine to the front is easy to do and can be completed in minutes.

This was originally posted on September 5, 2017, however, I am republishing with more information.

decorative glass jars

Decorative Glass Jars

To make this fall craft, we are going to use a Cricut and add vinyl on mason jars. This technique is easy and can be used for a variety of seasonal decor. This version is for fall but be sure to use the same idea to make jars for other occasions.

Supplies needed to put vinyl on mason jars:

supplies to put vinyl on mason jars

Hello Fall SVG File

For those that don’t have a Cricut or are having issues opening the design above, you can also get a free SVG file below that is similar to the one that I used. Just sign up for the newsletter below and the file will be sent to your email address. Look for a sign-up box below that has a picture of the file you wish to download than add your information. If you already get our newsletter, just add your information again as you will not be signed up for anything further. Once your sign up, check your email to get your file then use the instructions here to upload to Cricut Design Space.

Please note that this file is for personal use only. You can contact me for commercial use or if you have any issues getting the file.

How to Paint Mason Jars:

Start by painting the jar with spray paint and set it aside to dry completely. TIP:  Paint the jar upside down to get completed coverage without getting paint inside the jar. You can also paint the inside of the jar if you prefer but I would not do that if you are going to use the mason jar as a vase. I like to clean my jars with rubbing alcohol before painting to make sure they are really clean.

TIP: Allow your jar to dry at least 24 hours to make sure the paint stays on when you apply the vinyl.

How to Put Vinyl on Jars:

Next, cut your designs from two different colored pieces of vinyl. TIP:  You can use this tip to cut two different colors at one time with your Cricut machine. Be sure to size the design to fit the jar you are using before cutting.

adding transfer tape to vinyl

Weed your vinyl of any excess and middles in the letters. Apply transfer tape to the wreath first and remove from backing then center the wreath over the letters. You can see the basics of working with vinyl here. Press well and remove the backing from the letters as well. You are now ready to apply your words to the mason jar. You can see more tips and tricks for locating and layering vinyl here.

vinyl on transfer tape

Center the design on the front of the jar and press well to apply. TIP: You can also slice the transfer tape around the edges so it will bend around the jar easier. You can see more about how to do that here. Carefully lift the transfer tape to remove and you are left with a gorgeous addition to your fall decor. NOTE: You will want to make sure your paint is completely cured before attempting to apply the vinyl. I recommend allowing it to dry for at least 24 hours before adding the vinyl to the jar.

hello fall mason jar

Using Your Decorative Glass Jars

How many of these decorative glass jars will you make for your home? They would also make great gifts or even a centerpiece for Thanksgiving. Give this quick and easy craft idea a try for your home! Adding vinyl on mason jars is super easy and is a great new craft to add to your home.

how to put cricut vinyl on mason jars

Want to get the same look in your home? Add some twine pumpkins, monk’s cloth pumpkins, and rustic painted pumpkins to your home’s decor. They go great with these decorative glass jars and you will love the look in your home!

fall mason jar

Love this idea and want more? See the links below!

mason jar candle holder
foiled fall leaves
Fall Place Setting with a Cricut Machine

Use your Cricut and the foil transfer tool to make this gorgeous fall place setting perfect for Thanksgiving.

Read More

mason jar craft for fall
How to Make Fall Mason Jars

These fall jar crafts are so easy to make and you will love the way they look in your home.

Read More

fall wood sign
Thankful Sign for Fall

Make this cute fall sign from wood and add it to your home’s decor this autumn.

Read More

plastic pumpkin planter with a Cricut for fall
Pumpkin Planter

Make the perfect planter for fall with your Cricut machine!

Read More

Want to print the instructions for adding vinyl on mason jars? Try the card below!
Make decorative glass jars for fall with this simple tutorial! These have great farmhouse style!

Total Time 1 day 15 minutes

How to Add Vinyl on Mason Jars

Make decorative glass jars for fall with this easy technique and your Cricut machine.

Supplies

  • Smooth sided quart jar
  • Cricut Cutting Machine
  • Hello fall design
  • Vinyl in two colors
  • Transfer tape

Instructions

  • Start by painting the jar with spray paint and set aside to dry completely.  TIP:  Paint the jar upside down to get completed coverage without getting paint inside the jar.  You can also paint the inside of the jar if you prefer but I would not do that if you are going to use the mason jar as a vase.

  • Next, cut your designs from two different colored pieces of vinyl.  TIP:  You can use this tip to cut two different colors at one time with your Cricut machine. Be sure to size the design to fit the jar you are using before cutting.

  • Weed your vinyl of any excess and middles in the letters.  Apply transfer tape to the wreath first and remove from backing then center the wreath over the letters. You can see the basics of working with vinyl here.

  • Press well and remove the backing from the letters as well.  You are now ready to apply your words to the mason jar.

  • Center it on the front of the jar and press well to apply.  Carefully lift transfer tape to remove and you are left with a gorgeous addition to your fall decor. NOTE: You will want to make sure your paint is completely cured before attempting to apply the vinyl. I recommend allowing to dry for at least 24 hours before adding the vinyl to the jar.

Tried this project?tag us to show off your work!



[ad_2]

Source link

Coffin Treat Boxes with a Cricut Machine


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Coffin treat boxes are a great way to celebrate Halloween. Make these cute acetate boxes for Halloween favors. They are perfect to give out at a Halloween party or even to hand out to trick-or-treaters on Halloween night. You are sure to love the final product and whoever you give them to will love them as well.

coffin treat boxes for halloween

Coffin Treat Boxes

Want to give the gift of candy? Add it to some fun acetate favor boxes shaped like coffins. The scoring wheel is perfect for scoring acetate. I actually have had no success in scoring it any other way so I would highly recommend the wheel and the Maker over the stylus in any other machine. You can actually see a comparison of the scoring wheel versus stylus here. You can actually watch me make these coffin treat boxes as well as two other Cricut Halloween crafts in the video below.

Can’t watch the video or missed some of the steps? You can also follow along with the directions below.

Supplies needed:

cricut supplies for halloween crafts

How to Make Coffin Favor Boxes:

Start by cutting all of your materials. The foil acetate needs to be cut with the good side down so you can do your folds towards the scoring line. For this, you will follow the instructions on the screen for changing out the scoring wheel for the fine point blade. You will also want to be sure to mirror the cut on the iron-on and cut with the shiny side down.

cutting acetate with a cricut machine

Then weed away all excess from your iron-on including the eyes, nose, and mouth of your skeleton. Weeding tools make this a bit easier but are not required.

vinyl cut into skeleton shape

Add the iron-on to the black coffin shape. Preheat your cardstock, add the skeleton, and then press according to the recommended settings for the EasyPress. Be sure to protect your cardstock by using either the iron-on protective sheet or some parchment paper.

adding heat transfer vinyl to cardstock

Then fold your acetate coffin boxes. Remove the protective film and fold along all score lines.

assembling coffin box cut on a cricut

Then use clear tape or a tape runner to secure the box.

using dry adhesive on acetate

Add the black coffin to the top with more tape then fill it with candy! Halloween gift ideas have never been so easy!

adding skeleton to the font of a coffin treat box

These cute coffin treat boxes are perfect for any little one. I added candy corn to my version but feel free to add any small candy inside. Need a larger box? Just increase the size in Cricut Design Space before you cut.

halloween coffin treat box

Just lift the lid to enjoy a treat. So adorable and perfect to celebrate on Halloween night. I love easy crafts with my Cricut and this one definitely qualifies!

candy corn in a coffin gift box

If you need something to gift some candy in this Halloween, consider making these cute acetate favor boxes. They are perfect for those Halloween parties as well.

halloween gift box idea

The Cricut Maker makes Halloween gift ideas like these simple with the addition of the scoring wheel. Coffin treat boxes are really just the beginning. There are so many things you can make!

halloween gift ideas

Need more Cricut Halloween ideas? Try the links below as well!

halloween bags with names
DIY Tote Bags for Halloween

Make these cute DIY Halloween bags in minutes with a few supplies and your Cricut machine.

Read More

spider pillow for halloween
DIY Halloween Pillow with a Spider

Add some fright to your front porch by using your Cricut to make a DIY Halloween pillow!

Read More

apple picking fall sign
Halloween Wood Sign

Make a spooky Halloween wood sign with your Cricut and Testors Craft paint!

Read More

Make these witch legs for your Halloween decor in just minutes! A quick and easy Halloween decor project!
Halloween Witch Legs: Door Wreath Idea

Make these fun and colorful Halloween witch legs–a unige Halloween door decor idea!

Read More

Need Halloween candy ideas? Try making these witch legs for a creative Halloween treat!
DIY Halloween Treats with Your Cricut Machine

Make these candy witch legs with a few supplies and your Cricut.

Read More

Want to print the instructions for making these coffin treat boxes? Use the card below!
halloween gift ideas

Coffin Treat Boxes

Make Halloween favor boxes shaped liked coffins for a spooky good time!

Supplies

  • Cricut Maker
  • Cricut Foil Acetate
  • Scoring Wheel
  • Cricut Kraft Board in black
  • Cricut EasyPress 2 and mat (the 6×7 size works great here)
  • Clear tape or tape runner
  • Cricut Everyday Iron-on in white
  • Candy
  • Iron-on Protective Sheet or parchment paper
  • Cut file for Cricut Design Space

Instructions

  • Start by cutting all of your materials. The foil acetate needs to be cut with the good side down so you can do your folds towards the scoring line. For this, you will follow the instructions on the screen for changing out the scoring wheel for the fine point blade. You will also want to be sure to mirror the cut on the iron-on and cut with the shiny side down.

  • Then weed away all excess from your iron-on including the eyes, nose, and mouth of your skeleton. Weeding tools make this a bit easier but are not required.

  • Add the iron-on to the black coffin shape. Preheat your cardstock, add the skeleton, and then press according to the recommended settings for the EasyPress. Be sure to protect your cardstock by using either the iron-on protective sheet or some parchment paper.

  • Then fold your acetate coffin boxes. Remove the protective film and fold along all score lines.

  • Then use clear tape or a tape runner to secure the box.

  • Add the black coffin to the top with more tape then fill it with candy! Halloween gift ideas have never been so easy!

Tried this project?tag us to show off your work!



[ad_2]

Source link

Sublimation Protective Paper: What to use and NOT to use!


This article and pictures could contain Amazon or other affiliate one-way links. If you obtain anything by way of any hyperlink, I may obtain a little commission at no additional cost to you. Any provides utilized could be provided to me totally free of cost, even so, all projects and viewpoints are my personal.

Are you wanting for the proper sublimation protective paper? What particularly is blowout paper and why do you want it? I am answering all of individuals thoughts and additional today. We are covering butcher paper and other kinds of protective paper so you can make the appropriate decision about what is effective for your sublimation crafts. Can you use parchment paper? Will Teflon sheets perform? Discover out the solution to those people concerns listed here as perfectly! You will know what kind of protecting paper to acquire for sublimation and make crafting a little bit much easier!

sublimation protective paper

Sublimation Protective Paper

So, what ought to you use? What ought to you not use? What tends to make a great sublimation blowout paper? Click participate in and observe the video clip below to find out!

Can not enjoy the video clip or skipped some of the details? You can also comply with alongside beneath!

Supplies Employed

What is Blowout Paper?

Blowout paper is employed on prime of your sublimation print. In the scenario of cloth, I constantly set it beneath a shirt or in amongst the levels of the shirt. It is employed to catch the excess ink. Once sublimation ink will get heated and activated, you don’t want any of it to get onto your heat press or any other surfaces. You need to have blowout paper to catch that ink. 

When to Use Protective Paper

I usually recommend blowout paper anytime you’re carrying out sublimation crafts. Whichever sublimation craft you are carrying out, I normally advise incorporating at minimum 1 sheet on top of your sublimation print. In the circumstance of cloth, I also suggest a single sheet underneath what ever you’re sublimating on. This also contains sublimation of matters like a metallic plate. I would place a piece of blowout paper beneath it, and on prime of it, so that any blowout from my sublimation print will go onto that base sublimation blowout paper as properly. For anything like a tumbler, you would not essentially have everything beneath since there definitely is not an underneath region in that case.

What to Use for Sublimation Protective Paper

I have 3 selections for you that I suggest, then I’m heading to speak about the factors I really do not advise and why. To start with, let us talk about points that make a fantastic sublimation protecting paper:

  • It need to be white.
  • It should really be in a position to release humidity and not maintain that humidity in.
  • Appear for paper that is uncoated.

Below are a couple alternatives for your sublimation printing that comply with all of the procedures above.

  1. My beloved is the Artesprix Protective Paper. Artesprix Protecting Paper is meant for sublimation, so it is exclusively manufactured for your sublimation crafts, which is the purpose I like it. They do say you could reuse it if no ink receives on it. If I use it and no ink blows out of my sublimation print, then I just adhere it on to my sublimation cart and use it once again the upcoming time. If ink receives on it, you can minimize away the ink places.
  2. Following up is butcher paper, and it is critical that you get uncoated butcher paper. I like to purchase this significant roll on Amazon. I have a roll holder in my craft place and I stick the roll on and just pull some off. You can also get huge rolls at Sam’s Club and other places like that for a definitely affordable value. Certainly get the uncoated model due to the fact we want it to be equipped to take in that humidity and release it, not maintain that moisture in. 
  3. What if I do not have both of those? In a pinch I use frequent copy paper. A super cheap copy paper will function as blowout paper. You may well have to use several sheets to go over your complete task. It could get a tiny dear, primarily if you’re applying numerous sheets, but it does get the job done. Additionally it is one thing that almost certainly everybody has on hand.
sublimation blowout paper

What NOT to Use

Now that we have talked about what I like to use, what must you NOT use for sublimation protective paper. Listed here are a number of matters that I see people today use all of the time.

  • Do not use parchment paper. I get this problem all the time. Parchment paper definitely has a location in your craft room for HTV crafts and layering HTV. It is a terrific protection for that, having said that it is coated and it holds in that moisture. It is not suggested for sublimation crafting.
  • The next point which is not recommended for sublimation crafting is Teflon sheets. Yet again, Teflon sheets are remarkable for all those HTV crafts and layering. I like my Teflon sheets, nevertheless you do not want to use that for sublimation crafts. 
  • Do not use wax paper or freezer paper. All of these issues both cannot stand up to the heat or they do not release humidity.

Techniques to Recycle Utilised Paper

Now you may be saying to by yourself this seems wasteful. So, let’s communicate about ways you can use your aged sheets of sublimation protecting paper. You can unquestionably recycle it. Even so, I like to use it beneath kids’ crafts or what I paint. It tends to make a fantastic protecting sheet. After that ink will get on the paper, it’s not heading any place except if you heat it again. So really don’t use it on any crafts where by it would be heated once more but otherwise use it to defend your do the job floor.

paper for protection for sublimation

Stock your craft place with 1 of the possibilities that I have mentioned! The final point you want to do is get that ink on the surface of your warmth push since it can transfer to your styles in the long run. I would absolutely check out to preserve that sublimation ink off of individuals surfaces, and the way to do that is with the right blowout paper. I hope this assists you determine on the sublimation protective paper or blowout paper that is suitable for you!

protective paper for sublimation

[ad_2]

Source url

Cricut Tea Towels: 4 Ways to Make Fabric Projects


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Today, we’re going to make Cricut tea towels in four different ways. Did you know there were that many ways to do fabric projects with your Cricut machine? Well, there are! I’m going to use my Cricut Explore today, but any Cricut machine will work with all four of these methods for making fabric projects. So, what are we going to use? We’re going to use iron-on, which you might think of when you think of fabric projects. Then we’re going to use Infusible Ink with the polyester tea towel. Want to make a stencil? I have an option to use vinyl as well as freezer paper for stenciling. Each of these methods is super easy and it opens up a wide range of options, whether you’re making tea towels, shirts, or any other fabric project. 

cricut tea towels

Cricut Tea Towels

You can actually watch me make all four versions of this towel in the video below. Just click play!

Can’t watch the video or missed some of the steps? You can also follow along below!

Supplies Needed

supplies to make tea towels with a cricut explore air 2

Design Considerations

I am using designs from Cricut Design Space. Click “images” and search for “kitchen”. Click on designs you want to use and click “insert”. Here are a few considerations for designs depending on the method you are using to make your Cricut tea towels:

  • For HTV, you can really choose any design you would like as long as it will cut out of the HTV and you can weed it. NOTE: mirror the design before you cut. You can see more about HTV basics here.
  • When using vinyl as a stencil, I do use transfer tape to move the design to the towel. This means it doesn’t really matter what design you use as long as you can cut and weed it. You can see more about working with vinyl here.
  • For Infusible Ink, I do recommend wider lines. I would not use something with a thin font. I would use something with a thicker font. See how to use Infusible Ink the right way here.
  • For freezer paper, you will have to place each and every small item separately. I like to choose a design where there’s not a lot of little small pieces, such as middles of letters. When you’re using freezer paper, you might not want to go with something super complicated. I have an entire post on freezer paper stenciling here if you need help.

Cutting Materials

Let’s take a look at cutting each of these materials for our project.

HTV

Put the material shiny-side down onto the mat and be sure to mirror the design. I am using the everyday iron-on material setting.

cutting iron on with a cricut explore

Then just load the mat and start the cut.

cricut explore cutting black HTV

Vinyl

Place the vinyl liner side down on your mat. Pick the vinyl material setting.

adding vinyl to a cricut mat

Then just load the mat and press “go” to cut.

cutting vinyl with a cricut explore air 2

Infusible Ink

For Infusible Ink, you’ll want to place your sheet ink-side up on your mat. That means that the liner-side is down on the mat. With Infusible Ink, make sure it’s pressed down really well. You’ll want to pick “Infusible Ink transfer sheet” in Cricut Design Space as your material. Then, just feed in your mat and press “go” to start.

cutting cricut infusible ink

Before I eject Infusible Ink from the machine, I always check to make sure my cuts are through. To do that, just pull it up just a little bit and make sure that you can see the liner. If it is not cut through, click “go” to cut again. Once cut completely, eject the mat.

cricut infusible ink being cut by a cricut explore air 2

Freezer Paper

With freezer paper, you want to place it shiny side down onto the mat. You also DO NOT want to mirror before cutting. I just used a paper setting for my Explore because this is similar to a really thin copy paper and will cut about the same.

cutting freezer paper with a cricut machine

Load the mat and hit “go” to cut your design.

white freezer paper in a cricut explore air 2

How to Make Tea Towels with a Cricut

Now that you have all of your materials cut, it is time to look at making each version of the towel.

HTV

Weed your iron-on before starting. Use weeding tools and remove everything you don’t want to be pressed onto your tea towel. That’s everything around the outside, as well as things like the centers of any letters.

weeding the centers of letters from htv

Preheat the material first to remove any wrinkles and moisture. Put the design into the location where you want it to be. Set the time and temperature on the EasyPress to match the brand of HTV you are using.

how to put htv on a tea towel

Then press according to the instructions for your HTV. For Cricut iron-on, you’ll want to flip your project over and press from the back for about half the time.

cricut easypress on a tea towel

Then you may want to allow it to cool completely before removing the carrier sheet. Please follow the instructions for your brand of HTV. Peel back the carrier sheet. As you peel, make sure that your iron-on is stuck. If it’s not, replace the carrier sheet and repress it for a second time.

peeling back carrier sheet of iron on product

Infusible Ink

To weed Infusible Ink, you’ll want to crack your design by bending it in both directions to open up those cut lines.

how to weed cricut infusible ink

Then remove the inside pieces and the entire outside. Just like we did with the iron-on, all of the inside pieces of the letters, as well as everything outside will need to be removed from the Infusible Ink. NOTE: Infusible ink does need to be weeded slowly. You should not use weeding tools with Infusible Ink, but I will use something like a pair of tweezers for super small pieces.

how to weed infusible ink

To press, add some butcher paper onto the EasyPress mat. You’ll want to be sure to protect it. NOTE: Your towel MUST BE polyester for this product to work correctly.

pressing a polyester tea towel

Remove any lint from the towel with a lint roller. Add the Infusible Ink in the correct location. Cover with additional butcher paper then press for the full time and temperature. I used the instructions for shirts on the Cricut Heat Guide.

cricut easypress pressing a tea towel with infusible ink

Once it’s done, remove the EasyPress, butcher paper, and Infusible Ink sheet. You may notice some press lines. You can press from the back to remove some of those. If you do press it from the back, be sure that you have the butcher paper underneath just in case you reactivate some of the ink.

infusible ink tea towel

Stenciling with Freezer Paper

I pull the outside of the stencil right off of the mat and add it to my tea towel. Do not worry about the inside of the letters at this point.

freezer paper cut on a cricut machine

Pre-press the tea towel to remove any wrinkles. Then, locate the design onto the towel. Remember this is shiny side DOWN!

adding a freezer paper stencil to a tea towel

Quickly press it with your EasyPress for about 3 seconds. Then start peeling off the centers of those letters and putting them into place on your towel.

stencil for painting applied to a tea towel

Once those are in place, press with the EasyPress once more for about 3 seconds. You can add painter’s tape around the outside edge especially if your openings are close to the outside.

adding masking tape around a stencil

Put something under your towel to protect your work surface. I am using fabric paint for this project so it lasts a long time.

stencil ready to paint a tea towel

I am using two colors of fabric paint so that I can blend the colors and make something unique. Start at the top with the first color and slowly change the second as you move down the stencil.

using a stencil brush for a tea towel

Blend the two colors of paint as you go. While the paint is still wet, carefully remove the stencil from the tea towel.

blending paint on a stencil

Lift away the tape and the freezer paper. The material will just lift right off of the towel. Be careful not to get any paint on your towel from the stencil. You may need to pick up the centers of the letters with tweezers. Then you’ll want to follow all directions on your bottles of fabric paint. Some fabric paint requires that you heat set it after it dries.

cricut tea towels using a freezer paper stencil

Stenciling with Vinyl

Now it’s time for the vinyl stencil. You will want to remove everything from the center. Remember, we’re using this as a stencil, so we want everything that we need to paint to be removed. We’ll want to leave the centers of the letters and remove the outside pieces.

weeding vinyl to use as a stencil

Now that my design has been weeded, I’m just going to use some transfer tape and move everything to my tea towel. If you had a super simple design, you could just go ahead and lift it off the backing paper and then put that right onto your fabric. For more complicated designs with small pieces, I just like to put it on some transfer tape first to make sure I get everything onto my surface and in location. 

vinyl stencil on transfer tape

Put a scrap piece of paper on your table then put the tea towel on top of that. Locate the vinyl into position and press it down. Then, peel back your transfer tape.

applying a vinyl stencil cut on a cricut to a tea towel

Once again, you can put tape around this. If I’m super nervous about how close my design is to the edge, I would just add a little bit of tape just to give myself some extra space when painting.

adding masking tape around a stencil

With this one, I did some words in only the dark blue and then the word “beat” and whisk, I did a combination of the two colors I had.

ombre stenciling technique with fabric paint

Once you are done painting, just peel off the vinyl carefully. Be careful to not get any of the paint anywhere else on the towel.

removing vinyl stencil from a tea towel

Again, the centers of the letters probably won’t come up and you can use a pair of tweezers. Remember you’ll want to follow all directions on your fabric paint. It may require that you allow this to dry and then heat set it.

just beat it tea towel

What is the Best Way to Make Cricut Kitchen Towels?

All that’s left to do is for you to pick your favorite method for making tea towels or making any other fabric craft. I hope you see that there’s a wide range of options and they’re all simple to do. So, how do you choose? Here are a few considerations:

  • Reference the design section above. If you have a design in mind, you could work backwards. For instance, a really complicated design may work best with iron-on.
  • What material are you going to put it on? Polyester tea towel or polyester shirt? You might want to choose Infusible Ink because it lasts a really long time. If you are using a cotton surface, any of the other methods will work.
  • If you want to do an ombre effect or blend colors, stenciling is definitely the way to go. However, which of these stenciling methods is best? If you have a super complicated design in mind, stenciling with fabric paint and a vinyl stencil might be the way to go for you. If the design is simple, try the freezer paper method instead.

Keep in mind the final look you want, the design you’re going to use, and the material you’re going to put it on. Then, pick one of these four methods to work for your tea towels or any other fabric project.

tea towels made with a cricut machine

All that is really left to do is to pick a design and make some Cricut tea towels of you very own. Which of these designs did you like best?

dishes kitchen towel

I am drawn to the classic designs the most, however, some of the other towels in this post really turned out great.

polyester tea towel

I am really in love with the stenciled versions as they are so easy to make and you can really make any design you would like.

cricut kitchen towel

So, if you need me, I will be dreaming up more flour sack towels that I can make with paint and stencils.

making kitchen towels with a cricut

Pick your favorite method and use it on tea towels or any fabric project that you have in mind. Rememer these same methods will work on shirts and so much more.

how to make tea towels with any cricut

So, what are you waiting for? Grab your supplies and make some Cricut tea towels. I think you will love the way they turn out.

cricut kitchen towels

[ad_2]

Source link

Cricut Metal Sheets: Galvanized Sheets to Cut on Your Cricut


This post and photos may contain Amazon or other affiliate links. If you purchase something through any link, I may receive a small commission at no extra charge to you. Any supplies used may be given to me free of charge, however, all projects and opinions are my own.

Today I am introducing you to MetalFects, which are Cricut metal sheets that work with the Cricut Explore or Maker. This is actually chipboard covered in a galvanized-look sheet. This makes projects easy as the thick material will look just like metal on your surface. So, grab these metal sheets that cut with the deep point blade and start making all sorts of farmhouse-style crafts. You are going to love the look of this material and how easy it is to cut. Follow along below for tips and tricks when it comes to your design and common issues with the material.

cricut metalfects sheets

Cricut Metal Sheets

You can actually click play on the video below and watch me use MetalFects in a project on my Cricut Explore Air 2. You are going to love how these sheets look in the finished design!

Can’t watch the video or missed some of the information? Just follow along below!

Supplies Needed

metalfects sheets and supplies to make a sign on a table

MetalFects Sheets

Let’s take a look at the MetalFects product, and what’s included in the package. MetalFects is a metal-look craft sheet. What comes in the package? You get four sheets of the MetalFects, as well as instructions for use. The MetalFects itself is similar to chipboard and is self-adhesive on the back.

This material does require a deep-cut blade. That means that you can use it in an Explore or a Maker, but not in the Joy. They do also recommend that your images not be thinner than a 1/2 inch or approximately the width of two pencils. Right now, it just comes in the one metal finish. Hopefully, we’re going to cross our fingers that they come out with more soon.

Painting the Base

I used creamy off-white chalk paint for the inside of my sign and black for the frame portion. Add as many coats as you need to get good coverage. Be sure to allow to dry in between coats as well as drying completely before application of the MetalFects pieces.

painting a wood sign with chalk paint

Putting Cricut Metal Sheets on the Mat

Put MetalFects face-up on your StrongGrip Mat. They do recommend that you not place it all the way to the white line on the left side of your cutting mat. I place mine just a little bit over. The first thing you may notice is that these sheets are 11″ X 11″, so you will want to keep your design within that. You need to press it down really well on the mat. I find a brayer works well for that. That’s not required at all, and you could definitely just go over it with something else, but a brayer is a nice, smooth way to go over the top and make sure it’s on your mat really well.

cricut strong grip mat with galvanized sheet

Design Considerations for MetalFects

Remember that your pieces need to be at least the width of two pencils. I thought I would cut a design first that is NOT that size just to show you what can happen. However, here are a few things you can do to your design to make sure it is the size needed to cut correctly from the MetalFects sheets:

  • Contour out any small pieces that may be in the center.
  • Make your fonts wider by making them bold. You can also use the offset feature to put some extra material around any font. Be sure to weld this to your original font before cutting.
  • Offset any image to add extra space around the outside.
  • Slice off pieces of images and make just those a little larger or add the offset. Then weld them over the top of the original piece.
  • Add shapes over the top of any thin lines and weld them to the original.

You can actually see me use all of these strategies in the video above. Your goal is to make your design a bit thicker for this material to make sure it cuts well from the Cricut metal sheets.So, what happens when you cut thin lines?

metal chicken cut on a cricut

Because the feet on this chicken were so thin, the layers of the material began to separate. The chicken itself looks amazing, but when you have thin details like this foot, it does get messed up. So, use the tips above to alter the designs to work better with this material.

tips for cutting metalfects sheets

Custom Material Setting

NOTE: You will only have to add this new material one time for each of your machines and it will remember it from that point forward.

You will need a custom material setting for this material. If you are using an Explore Air 2 or earlier, be sure to put your dial on custom. Once you click make it in Design Space, click browse all materials. Then click material settings in the lower left-hand corner. Scroll all the way to the bottom and click add new material.

material settings cricut design space

Name your material and click save. Then set it for the deep point blade, 8x for the number of cuts, and 295 for the material pressure. Then click save.

metalfects custom material setting

Once this is set up, you can pick MetalFects for future cuts, directly from your Custom Material menu.

Cutting MetalFects

Once you have your custom material picked, it is time to cut your design from the MetalFects sheets. Add your deep point blade to the machine and move the white star wheels along the roller bar all the way to the right.

putting the deep point blade in the cricut explore air 2

Then you can load your mat and begin your cut. Be sure to watch your cuts carefully.

cutting metal sheets with a cricut

I did want to show you what happens with your white star rollers if they run on the material. If you don’t move them to the side, you would have marks like the ones shown below down the center of your sheet.

Cricut Metal Sheets: Galvanized Sheets to Cut on Your Cricut

Small Pieces During Cutting

Let’s take a look at something that might happen to you when this material is cutting. Small pieces may cut completely and pop out from your design during the cutting process. If you see this happen, pause your machine and remove those pieces. Here a piece came out and it was actually scrap from inside the chicken’s legs. I just paused the machine, removed the piece, and discarded it. Then just hit pause again to resume your cut.

galvanized sheet cut on a cricut

Checking Your Cuts

Occasionally during the cutting process for these multiple-cut pieces, I suggest that you pause your machine and check to see if your material is cut all the way through. Just hit pause again to continue cutting. When the cut is done, I also recommend that you check the cut before you remove it from your machine. I like to peel up the material and make sure it’s cut completely and all the way through. If it is cut all the way through, remove from the machine. If it is not, you can click the go button again for an additional pass.

deep point blade cutting metalfects sheets

Once you have your design right, this material cuts amazing. I was left with my letters and a chicken for a sign. Let’s take a look at how to put that together!

Assembling a Farmhouse Style Sign

Now that you have your pieces, you will need to remove them from the rest of the sheet. Remember they are adhesive on the back.

removing small pieces cut on a cricut

I like to remove them all and put them adhesive side up on my table in order that they will be put on the sign.

chipboard letters cut on a cricut

Then we will need something to get them into the location on the sign correctly. I separated the adhesive layer from my scrap piece and peeled it back.

removing adhesive from sheet of chipboard

Then I trimmed the scrap with scissors until it fit into my sign. Then you can just place each letter and press down well to adhere into place.

using cut chipboard sheet as a template

Once all of your pieces are in place, just peel back the scrap and discard.

making a farmhouse style sign with pieces cut on a cricut machine

Then your sign is complete and ready to be displayed around your home!

farm fresh eggs sign cut on a cricut

I have a cute, metal-looking sign all with my Cricut Explore and MetalFects metal sheets! Now you know how to get that gorgeous, farmhouse, galvanized look with metal right in your Cricut Explore or your Cricut Maker with MetalFects.

metal letters cut on a cricut

FAQ

Here are a few of the questions I have received but feel free to ask any other questions you have in the comment section below.

Is this material real metal?

It is not. It is a chipboard material covered in a sheet that is made to look like metal.

Can you cut these Cricut metal sheets in a Glowforge?

Currently, you cannot.

Can you cut MetalFects with the fine point blade?

No. You will need the deep point blade.

Where can I purchase MetalFects?

Currently, it is only for sale on their website here.

What material setting do you use to cut these sheets?

I went over the custom material setting above that you will need to set up.

cricut metal sheets cut into pieces to make a sign

So, whether you make your own farm fresh eggs sign or another project, I really think you will love how these sheets make your projects really pop!

metal look to material cut on a cricut

Be sure to pick up MetalFects and use these Cricut metal sheets in your next project. I know you will love the results.

metal sheets to cut with a cricut

[ad_2]

Source link